Effects of tool paths and machining parameters on the performance in micro-milling of Ti6Al4V titanium with high-speed spindle attachment

Basit Öğe Kaydı
dc.contributor.authorKuram, Emel
dc.contributor.authorOzcelik, Babur
dc.date.accessioned2025-10-29T11:33:22Z
dc.date.issued2016
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractThe objective of the current work was to investigate the influence of tool path and micro-milling conditions on wear, surface roughness, and forces when micro-milling Ti6Al4V titanium material. The performances of raster (zigzag) and single-direction raster (zig) tool paths were evaluated. The micro-milling experiments were carried out by employing high-speed spindle attachment connected to main spindle of standard machine tool under various tool paths. The experimental studies consisted of two stages. In the first stage, the effect of spindle speed by employing high-speed spindle attachment was examined under various tool paths at low and high feed rates. In the second stage, the effect of feed rate on machining performance was investigated under various tool paths. Based on this study, the optimum cutting conditions could be determined when using high-speed spindle attachment under various tool paths.
dc.description.sponsorshipTUBITAK-BIDEB
dc.description.sponsorshipThe frst author (Emel Kuram) is grateful to TUBITAK-BIDEB due to the Ph.D scholarship.
dc.identifier.doi10.1007/s00170-015-7741-7
dc.identifier.endpage703
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue1-4
dc.identifier.orcid0000-0001-5742-9498
dc.identifier.orcid0000-0003-3864-7582
dc.identifier.scopus2-s2.0-84940479066
dc.identifier.scopusqualityQ1
dc.identifier.startpage691
dc.identifier.urihttps://doi.org/10.1007/s00170-015-7741-7
dc.identifier.urihttps://hdl.handle.net/20.500.14854/12363
dc.identifier.volume84
dc.identifier.wosWOS:000374403900055
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer London Ltd
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20251020
dc.subjectMicro-milling
dc.subjectTool path
dc.subjectTool wear
dc.subjectSurface roughness
dc.subjectForce
dc.subjectTitanium alloy
dc.titleEffects of tool paths and machining parameters on the performance in micro-milling of Ti6Al4V titanium with high-speed spindle attachment
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Mühendislik Fakültesi Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu