Analysis of reformate syngas mixture fed solid oxide fuel cell through experimental and 0-D thermodynamic modeling studies

dc.contributor.authorErdogan, Anil
dc.contributor.authorCapotondo, Federico
dc.contributor.authorInce, Alper Can
dc.contributor.authorHagen, Anke
dc.contributor.authorColpan, C. Ozgur
dc.date.accessioned2025-10-29T11:27:20Z
dc.date.issued2023
dc.departmentGebze Teknik Üniversitesi
dc.description.abstractIn this study, the performance assessment of a solid oxide fuel cell (SOFC) fed with a reformate syngas mixture and having anode off-gas recirculation is done in terms of energy and exergy analyses. In this regard, a zero-dimensional (0-D) mathematical model for SOFCs is developed. This model is validated by the results of the in-house experimental studies. In addition, parametric studies are carried out to assess the effect of operating parameters on fuel cell performance. The results show that the proposed model is very agreeable with experimental studies. The maximum error found in the validated model is 6.8% at the operating temperature of 800 & DEG;C. In addition, it is shown that the anode off-gas recirculation ratio does not have a significant effect on the performance of the SOFC at low current densities. Furthermore, the exergy destruction rate of SOFC increases by 23.2% under the high current density condition (i = 1.4 A/cm2) when the fuel utilization ratio increases from 0.75 to 0.95. & COPY; 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
dc.description.sponsorshipHigher Education Council
dc.description.sponsorship2211-A Program [1649B031901752]
dc.description.sponsorshipScientific and Technological Research Council of Turkey (TUBITAK)
dc.description.sponsorship2214-A Program of the Scientific and Technological Research Council of Turkey (TUBITAK) [1059B142000598]
dc.description.sponsorshipThe first author would like to thank 100/2000 Program of The Higher Education Council (YOK) and 2211-A Program (Grant Number: 1649B031901752) of the Scientific and Technological Research Council of Turkey (TUBITAK) for the support it received throughout his Ph.D. The first author would like to thank the 2214-A Program (Grant Number: 1059B142000598) of the Scientific and Technological Research Council of Turkey (TUBITAK) for providing financial support to his research at the Technical University of Denmark. The authors would like to thank Xiufu Sun, a development engineer, from the Department of Energy Conversion and Storage, Technical University of Denmark (DTU) for technical discussions and advice on the experimental studies of SOFC.
dc.identifier.doi10.1016/j.ijhydene.2022.10.139
dc.identifier.endpage23126
dc.identifier.issn0360-3199
dc.identifier.issn1879-3487
dc.identifier.issue60
dc.identifier.orcid0000-0002-0933-9305
dc.identifier.orcid0000-0003-2001-8040
dc.identifier.scopus2-s2.0-85141997249
dc.identifier.scopusqualityQ1
dc.identifier.startpage23110
dc.identifier.urihttps://doi.org/10.1016/j.ijhydene.2022.10.139
dc.identifier.urihttps://hdl.handle.net/20.500.14854/10686
dc.identifier.volume48
dc.identifier.wosWOS:001035469200001
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherPergamon-Elsevier Science Ltd
dc.relation.ispartofInternational Journal of Hydrogen Energy
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20251020
dc.subjectZero-dimensional mathematical
dc.subjectmodel
dc.subjectExperimental studies
dc.subjectSolid oxide fuel cell
dc.subjectMATLAB
dc.subjectSyngas
dc.titleAnalysis of reformate syngas mixture fed solid oxide fuel cell through experimental and 0-D thermodynamic modeling studies
dc.typeArticle

Dosyalar