The effect of high TiC particle content on the tensile cracking and corrosion behavior of Al-5Cu matrix composites

Abstract

The high-TiC particle volume fraction on the mechanical properties and corrosion behavior of the A-5Cu matrix composites were investigated with porosity, hardness, tensile tests, and polarization measurements. The composites reinforced with 18, 27, and 50 vol% TiC particulates were produced successfully by using hot-pressing technique under Ar atmosphere and characterized by scanning electron microscope, electron dispersive spectroscope, and X-ray diffraction. The corrosion susceptibilities of the composites were compared with potentiodynamic scanning technique. It was found that the hardness of the composites increases while the fracture strength decreases with increasing TiC reinforcement content in the matrix. The corrosion susceptibilities of 18 and 27 vol% TiC-reinforced composites are almost the same; the corrosion rate of 50 vol% TiC-reinforced composite was approximately 10 times higher than the composites reinforced with 18 and 27 vol% TiC particles in the 3.5% NaCl. In addition, some preferential corrosion attacks were detected at TiC/matrix interfaces and in TiC clusters during the corrosion process of the composites. Therefore, the porosity content in the composites was almost the same level.