Heat Transfer Performance of Water Based Nanofluids Containing Various Types of Metal Oxide Nanoparticles in an Air-Cooled Microchannel Heat Exchanger

dc.contributor.authorParlak, Murat
dc.contributor.authorOsturk, Ozge
dc.contributor.authorTemel, Umit N.
dc.contributor.authorYapici, Kerim
dc.date.accessioned2025-10-29T11:37:30Z
dc.date.issued2017
dc.departmentFakülteler, Temel Bilimler Fakültesi, Kimya Bölümü
dc.description16th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) -- MAY 30-JUN 02, 2017 -- Orlando, FL
dc.description.abstractIn the present study performance of air-cooled cross flow microchannel heat exchanger is analysed experimentally with various metal oxide type nanofluids. Types of the nanoparticles and their particle size are TiO2 (30 nm, 50 nm), MgO (20 nm, 40 nm), ZnO (10-30 nm, 35-45 nm, 80-200 nm), SiO2 (20-30 nm, 60-70 nm), NiO (10-20 nm) and Fe3O4 (15-20 nm). Zeta potential measurement is employed for the stability evaluation of the dispersions. Among the nanofluids considered, only suspensions containing SiO2 (60-70 nm) and NiO (10-20 nm) nanoparticles give zeta potential above the critical stability value of 30 mV. Strong dependency between relative zeta potential of the suspensions and particle size is observed. The heat transfer characteristic of nanofluids through the cross flow air cooled microchannel heat exchanger is evaluated with the overall heat transfer coefficient under laminar conditions. Experimental results show that, all nanofluids considered, except TiO2/water, deteriorate the heat transfer coefficient of nanofluids depending on the flow rate through heat exchanger. This may be may be explained by the poor nanofluid stability and deposition of nanoparticles to the surface of the channels during the flowing of the nanofluids.
dc.description.sponsorshipInter Soc,IEEE,IEEE Components Packaging & Mfg Technol Soc,Intel Corp,Binghamton Univ,Univ Maryland,Dupont,IBM Corp,Huawei Technologies Co
dc.description.sponsorshipAselsan
dc.description.sponsorshipThe authors would like to acknowledge the Aselsan for providing financial support for this research.
dc.identifier.endpage5
dc.identifier.isbn978-1-5090-2994-5
dc.identifier.issn1087-9870
dc.identifier.scopus2-s2.0-85034452600
dc.identifier.scopusqualityN/A
dc.identifier.startpage1
dc.identifier.urihttps://hdl.handle.net/20.500.14854/13856
dc.identifier.wosWOS:000426688100002
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherIEEE
dc.relation.ispartofProceedings of the Sixteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems Itherm 2017
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20251020
dc.subjectNanoparticles
dc.subjectNanofluid
dc.subjectHeat exchanger
dc.subjectHeat transfer
dc.subjectStability
dc.titleHeat Transfer Performance of Water Based Nanofluids Containing Various Types of Metal Oxide Nanoparticles in an Air-Cooled Microchannel Heat Exchanger
dc.typeConference Object

Dosyalar